Products
Home / Products / Marine Paint /

Brown Self Polishing Marine Antifouling Paint Tin Free Boat Bottom Paint

Brown Self Polishing Marine Antifouling Paint Tin Free Boat Bottom Paint

Brand Name: DOWILL
Model Number: DWAFMARINE 3000
MOQ: 500KGS
Price: NEGOTIABLE
Payment Terms: T/T
Supply Ability: 500T/MONTH
Detail Information
Place of Origin:
CHINA
Certification:
CCS BV
Item Name:
Tin-free Self-polishing Anti-fouling Paint
Function:
Bottoms & Below Water Of Steel Structure As Maintenance Anti-fouling Paint For Ship Industry
Standard:
GB/T6822-1986
Color:
Brown/Light Brown
Film Thickness:
Dry:75-150 P M/coat Wet:127-254 μ M/coat
Application Temperature:
-5℃-40℃
Packaging Details:
Standard export paint packaging
Highlight:

Self Polishing Marine Antifouling Paint

,

Brown Marine Antifouling Paint

,

Tin Free Boat Bottom Paint

Product Description
Marine Use Under Water Steel Structure Use Tin-Free Self-Polishing Anti-Fouling Paint

1.RECOMMENDED USE

Can be used in bottoms & below water of steel structure as maintenance anti-fouling paint for ship industry etc.

 

2.COMPLIED STANDARDS

Complies with GB/T6822-1986

 

3.FEATURES

(1).Long-term protection against fouling
(2).Controlled surface smoothness by a self-polishing effect
(3).Free from organic tin compounds
(4).Outstanding high-build applicability
(5).Good workability

 

4.PHYSICAL PROPERTIES
(1).Color:Brown, Light brown
(2).Volume solids:59%
(3).VOC:419 g/L
(4).Flash Point:Greater than 23C
(5).Film thickness

Dry:75-150 p m/coat   Wet:127-254 μ m/coat
(6).Theoretical Coverage:5.9m²/L/100 microns
Practicalcoveragdependingonsufaceconditins,envionent applications,etc.

 

5.SURFACE PREPARATION
(1).Remove oil and grease with suitable detergent or solvent(SSPC-SP 1)
(2).Remove rust,mill-scale and other loose material completely by abrasive blasting(ISO Sa2.5).
(3).All surface to be coated should completely clean dry and fee from contamination.

 

6.APPLICATION

Application Temperature:-5℃-40℃

Mixing:Mix thoroughlywith power agitator

Mixing Ratio:One component coating

Application Methods:Airless spray,air spray, brush and roller

 

Airless spray
Nozzle tip:0.43mm-0.53mm
Nozzle pressure:>15Mpa

 

Thinner: Special Thinner

 

Drying Time& Overcoating interval:

Temperature -5℃ 5℃ 20℃ 30℃
Surface dry 8hrs 2hrs 1hrs 0.5hrs
Dry to touch 22hrs 8hrs 5hrs 4hrs
Min.interval 22hrs 8hrs 5hrs 4hrs
Max.interval --- --- --- ---

 

 Applied Substrate:Bare steel

Typical undercoat:DWPEMARINE 300G (Ethylene transition paint) etc.

 

7.STORAGE
Store in dry,cool condition and away from sources of heat and ignition Containers must be kept tightly closed.
Shelf life:12 months from date of production (25C)

 

8.DISCLAIMER 

The information given on this sheet is to the best of our knowledge and accurate at the time of issuing.Since conditions of use are beyond the manufacturer's control, information contained herein is without warranty,implied or otherwise,and the suitability of the material for the use contemplated is the sole responsibility of the buyer.The information contained on this data sheet is subject tomdattatplcodi
using the product.